VIDEO: Diamond Trapezoid Adapters with the EDCO® Magna-Trap System
Learn how to attach Diamond Trapezoid Adapters on the EDCO®; Magna-Trap System
Using Virginia Abrasives Diamond Trapezoid Adapters with the EDCO® Magna-Trap System is literally a snap! This short video walks you through how to install the adapters on the EDCO® Magna-Trap System and attach Virginia Abrasives grinder tooling on those adapters.
Installing the adapters and corresponding Virginia Abrasives' grinder tooling can be done without using any tools, leveraging the magnets and shape of the EDCO® Magna-Trap System simply by sliding them firmly into the slots of the Magna-Trap System head.
Removing them is nearly as easy just slipping a flat-head screw driver into the slots on each adapter and twisting to release the magnetic attraction between the adapter and the grinder tooling. Then just tap the adapters gently towards the center to free them from the EDCO® Magna-Trap slots.
Enjoy the Video!
The Adapter for Virginia Abrasives grinder tooling can be found on our site here.
The PCD Grinder Tooling shown in the video can be found on our site here.