Effective removal of thick mastics, glues, membranes, epoxy coatings 30 mils & up (1) For Single segment tooling to penetrate the surface allowing for easy strip away old paint, epoxy, sealers and other coatings (1) For use on concrete, stone, and terrazzo surfaces (1) Heavy duty all in one grinding solution for Concrete, Stone & Terrazzo. For use with Plug 'N Go plates (1) Heavy duty all in one grinding solution for Concrete, Stone & Terrazzo. For use with Plug 'N Go plates. (1) Prep (1) Removal of medium to thin masitcs, glues, epoxy coatings (30 mils or less) (1) Used to remove glues, adhesives coatings, and thinset (1) Clockwise Rotation (1) Counter-clockwise rotation (1) Polish (1) Surface Preparation: creates a clean CSP 3 profile surface for maximum adhesion for coatings or overlays (1) Surface Preparation: creates a clean CSP 3 profile surface for maximum adhesion for coatings or overlays (1) Versatile size allows for surface preparation (1) Sand (1) Edge (1)

Medium bond for general surfaces (1) Soft (1) Soft bond for hard concrete (1) Soft bond for hard surfaces (1)

Concrete Surface Preparation for use with Plug 'N Go plates (1) Concrete Surface Preparation for use with Plug 'N Go plates. (1) Designed for use with The Boss (1) Drives the accessory shafts and components (1) Drives the main motor and transfers power to the machine's operational components (1) Hard foam is ideal for sanding hardwood as it provides a flatter surface (1) Heavy Duty Concrete Surface Preparation for use with Plug 'N Go plates (1) Heavy Duty Concrete Surface Preparation for use with Plug 'N Go plates. (1) Optimal grinding coverage and minimal tooling marks (1) PCD with bar is less aggressive to not damage concrete (1) PCD with Shark is very aggressive and will leave a coarse profile on concrete (1) Provides optimal maneuverability, allowing for precise grinding along edges and corners (1) Provides superior conformability to uneven surfaces, ensuring consistent contact and optimal results on textured floors (1) Seals machine bottom acting as vacuum chamber to contain dust under machine (1) straight pin that will fail (break) to protect the machine from damage due to excessive loads or stresses (1) These durable grommets are designed to add rotational movement to your shear pins (1) Black: Ideal for surface prep, grinding, and polishing tasks (1) Designed to be used with Scarab (1) Disassembles into 3 components for easy transport (1) Integrated hook & loop system allows quick & easy attachment of sanding discs, polishing pads & other accessories (1) 14" Grinding Footprint (1) Included Foam, backer plate and shear pins. Direct Replace Part (1) Teardrop Shape offers optimal grinding coverage and minimal tooling marks (1) High Quality Replacement Plate (1) No weight required (1) Hard foam is ideal for sanding hardwood as it provides a flatter surface. (1)